Rolling f44

Oh, I've been doing it all wrong then...

 

How you doing it MJ?
Not rolling like an apprentice 'tut tut'

 

NO mate... just on my own... trowel, roll and lay... and get whoever's around to do me a cuppa...

 

Xl is a 2 man job to unroll
Unfortunately I'll be on my own no one to make tea either

 

You need to get some 'auto tea makers' in your shop MJ, your soooo slooowwwwwww

 

5 rolls
10lm runs
no heat... someone will make me tea...

 

Pump them guns and get grafting then lol

How many m2 is it?

 

cre8tive where are you....

 

No heat with XL...you deserve a medal

 

head torch aswell .. oh the joys

 

Now you are showing off!!

 

Its only 60 sq. Its first bigish one i got for them. normally only get the repairs there so hoping it will lead to more.

 

You don't roll ht addy as you need the surations, think fibre reinforced is ok to roll though.

 

Thanks for that will a2 it then as normal.

 

I use a 1.5mm vinyl trowel blade on ht, think it grabs better myself but thats just me.

 

Interesting only used a a2 and years back a a1 notch. Will try 1.5 while I'm trying new things.

 

I find the dpm melts the foam and just makes a mess. I`m normally doing big area`s though, so maybe no problem with smaller areas.

 

You need these then...
http://www.tradediscountshop.co.uk/...y-25cm-adhesives-varnishes-solvent-resistant/

 

An A2 is 1.5mm isnt it.

 

Depth of a a2 notch is 1.5 (might be 1.4mm i use the janser ones )but the tooth width is smaller (f ball call it a 1.5 mm by 3mm) where as the f44 one is 1.5 by 5mm the teeth are further apart. The x mm bits are the centres of the notch so a a2 will have the centre of the 1.5mm notch every 3mm where as the 1.5mm (f44) notch will have it every 5mm. If that makes any sense to anyone