20mm Clip Top

Does anyone know of a ramp edge, clip top to take in 20mm.
i.e 20>nothing ?
I`ve found some metal ones, but there looking for a plastic top.

 

Gradus do a Clip top one. Buggered if I can remember the code but its also a bendy one too

 

Does it suit 20mm though ?
Ive been using a Gradus one, but its not really quite right. It would be ok if it was going up to carpet, but not smooth.

 

I thought gradus done one too

 

Have you called CAT. They normally have something

 

I`ve been through there brochure too mate, just can`t find one

 

whats the flooring Neily?
Is it going from rubber tile to nothing?

 

Yes mate, its two 10mm layers of rubber. The clip top needs to ramp down from the rubber, to existing 2mm thick vinyl

 

Blind guessing here, so don't make fun of me
Could you cut the lower layer slightly short to allow the top layer to overhang and ramp down to an smaller clip top size? Even if it meant cutting the lower layer with a bevel for the upper layer to ride smoothly down? Not ideal I know and may not look at good as a 20mm clip top, just thinking of an alternative solution.

 

Might be worth a try mate, did n`t think of it tbh.
I will try a test piece, and see how it looks, cheers

 

How about sitting the front of the clip top onto a dim strip?

Another thing to try?

 

I have tried that one, looks a bit pony, but thanks for the thought.

 

Think you'll defo need to improvise on this one, think Jambo's idea can work depending on how the top meets the top layer when its sitting down on the 2nd layer. I would have thought gradus would have made a Strip like the T600 but in a thicker strip ie T2000