NA over NA?L

Discussion in 'Subfloor Preparation' started by Rugmunching, Oct 2, 2015.

  1. Rugmunching

    Rugmunching Well-Known Member

    3,874
    678
    113
    Ladies and gents....

    Screeded a kitchen today with NA but will need another coat next week to build up another 3/4mm so im assuming I can go straight over the top of the NA thats down without priming?

    Never had to do 2 coats of NA before, only with stopgap/screedmaster and both had to be primed in between coats.
     
    Rugmunching, Oct 2, 2015
    #1
  2. Rugmunching

    Rugmunching Well-Known Member

    3,874
    678
    113
    Dont know why there is an 'L' in the title :confused:
     
    Rugmunching, Oct 2, 2015
    #2
  3. dannyboy

    dannyboy Well-Known Member

    988
    346
    63
    Na will be fine over na.
    Same compressive strength.
    I would prime though.
    It will flow better and stop pinholes.
     
    dannyboy, Oct 2, 2015
    #3
    • Agree Agree x 2
    • Like Like x 1
    • List
  4. dazlight

    dazlight Super Moderator

    7,218
    1,711
    113
    Defo prime. I only don't prime with NA on Ashpalt
     
    dazlight, Oct 2, 2015
    #4
    • Like Like x 2
    • Agree Agree x 1
    • List
  5. merit

    merit Well-Known Member

    8,222
    1,681
    113
    Pinholes like mad if you don't prime it!
     
    merit, Oct 2, 2015
    #5

Share This Page