Wolff ninja for sale?

Discussion in 'Tool Chat' started by LVTFitter37, Mar 27, 2020.

  1. LVTFitter37

    LVTFitter37 Active Member

    34
    3
    8
    hi guys I have the Wolff samba which I use for just buffing off my latex but have landed myself a large job which is an anhydrite screed so using the grit paper is no good. I'm looking for the ninja plate with the blades so I can buff off the screed and get rid of the milk if someone has the plate and the vacuum can you let me know if you'd like to sell.

    Thanks
     
  2. mjfl

    mjfl Well-Known Member

    6,258
    1,593
    113
  3. LVTFitter37

    LVTFitter37 Active Member

    34
    3
    8
    Yes we may of done. This looks over kill for what I need plus double the cost.
     
  4. Neilydun

    Neilydun Well-Known Member

    2,859
    1,212
    113
  5. LVTFitter37

    LVTFitter37 Active Member

    34
    3
    8
    1300sqm its small studio apartments say 60sqm each. It's not to be done all at once tho.
     
  6. Neilydun

    Neilydun Well-Known Member

    2,859
    1,212
    113
    For that size you do really want a 3 motor vac, like the one on the shop.
    I personally would buy 110v, then you can use anywhere.
    If you buy something smaller, its likely to be false economy, as it will probably break/clog, just be a general pain in the arse. I have done this, so I know.
    The way I try and look at things, is if you can make the job pay for the equipment, you might not make any money, but you will always have the plant for future use.
     
    • Like Like x 1
    • Agree Agree x 1
    • List
  7. LVTFitter37

    LVTFitter37 Active Member

    34
    3
    8
    Are you saying get the ninja plate etc then get all the vac to go with it?. I'll be honest my jobs are normally a small hallway up to 100sq etc so this isn't something I do normally so when it comes to tools I'm pretty new to it even tho iv been fitting for 20 years but always learning
     
  8. Rugmunching

    Rugmunching Well-Known Member

    3,656
    629
    113
    I'm probably in similar boat where I get the odd job where it's in the 400/500 m2 as most of mine are average 100 - 150m2 (house/shops/hairdressers etc)
    I bought a refina pd23 at a good price and then got a steak on a nilfisk 791 attix hoover/extractor at first I thought it wouldn't be enough but I'm more than happy with its performance. Both cost me no more than £600 combined.

    Originally I was looking into the dust skirt and vac for my str machine but these 2 popped up went for it.
     
  9. Rugmunching

    Rugmunching Well-Known Member

    3,656
    629
    113
  10. LVTFitter37

    LVTFitter37 Active Member

    34
    3
    8
    See iv got the samba so just seems the right thing to do to buy the ninja plate then a vac nothing to big but bigger than a Henry. Iv not a clue where to buy from either was hoping someone had a ninja plate I could buy off them.
     
  11. Rugmunching

    Rugmunching Well-Known Member

    3,656
    629
    113
    Have you got the dust skirt for your wolff?
     
  12. Neilydun

    Neilydun Well-Known Member

    2,859
    1,212
    113
    Ive got a plate I dont use somewhere, will have a look.
    I went through loads of vacs but the three motor ones are excellent, and worth the money.
    Where abouts are you based ?
     
  13. LVTFitter37

    LVTFitter37 Active Member

    34
    3
    8
    No do need the skirt as well. Yeah nice is that the ninja plate. I'm down in Worcester. I'm happy to buy a vac but do want one which attaches to my samba. Is there any on eBay or another site that goes onto the samba.
     
  14. Rugmunching

    Rugmunching Well-Known Member

    3,656
    629
    113
    What will you attached your vacuum pipe to to suck up the dust? Or are you on about just scrubbing the floor down then vacuuming up the mess?
     
  15. Rugmunching

    Rugmunching Well-Known Member

    3,656
    629
    113
    You'll need the skirt if you plan on sucking up the dust whilst machining down or was you referring to using the vac to get all the mess up after you have machined the floor down?

    If you are machining off laitance or heavy grinding then the hoover that attaches to the Wolff wont keep up, they're not that great. Light buffing yes but compared to the big industrial hoovers they're way behind.
     
  16. mjfl

    mjfl Well-Known Member

    6,258
    1,593
    113
    It was me you spoke too, I can email Wolff and see if they can send stuff from Germany direct if open??
     
  17. LVTFitter37

    LVTFitter37 Active Member

    34
    3
    8
    I am thinking a bigger better Hoover that attaches to the samba but not silly money iv seen the box shape ones but don't know which of these go onto the Wolff lower skirt.

    Yes that would be great iv managed to borrow a Wolff copper disc that I'm going to try first on Monday but if not I will then get the lower skirt and the ninja.
     
  18. mjfl

    mjfl Well-Known Member

    6,258
    1,593
    113
    www.tradediscountshop.co.uk is still open and running, but please ask me about what's in current physical stock.
    https://www.tradediscountshop.co.uk/shop/wolff-dust-ring-72462/
     
  19. LVTFitter37

    LVTFitter37 Active Member

    34
    3
    8
    Do you have this in stock and is it the Wolff one? Do you know any makes brands of vac that will attach to it? Apart from the one you mentioned. Just want something that's bigger than say a Henry type because I just won't get any use from a huge vac.
     
  20. Neilydun

    Neilydun Well-Known Member

    2,859
    1,212
    113
    With the right coupler, any vac will attach to anything
     

Share This Page