How to know screed is properly dry for LVP?

Discussion in 'Vinyl / Impervious floor coverings' started by Jameson244, Jul 12, 2023.

  1. Jameson244

    Jameson244 New Member

    1
    0
    1
    Can anyone help please? I've received differing advice on laying a new LVP floor. I would appreciate advice: We had a 75mm sand and cement screed laid on 25 May. On 11 July the moisture readings from a hygrometer are about 76%.

    We are agreeing to fit the floor toward the end of July when the screed will have been down for c.60 days. The weather’s been very warm and it’s south facing - can we assume it’s dry enough to lay the floor on (with appropriate levelling compounds) if all the readings on a handheld hygrometer are under 75%?
     
  2. HC&F

    HC&F Well-Known Member

    303
    47
    28
    It would be a good indication you can go ahead but should use hygrometer boxes to take readings to be safe. Failing that use a liquid dpm and your good to go
     
  3. dazlight

    dazlight Super Moderator

    7,216
    1,709
    113
    Be careful as the sun might not cover the whole room.
    The boxes should be laid in areas where the sun isn’t reaching. A average 4-6” screed will take around 4-6 months to dry out in normal conditions
     
  4. merit

    merit Well-Known Member

    8,222
    1,681
    113
    If it’s a new screed and only releasing construction moisture you may as well use a dpm primer like Ardex mvs95. Then no moisture issues and the levelling compound flows better
     

Share This Page