We have just laid down some engineered wood, it's glued. Is there anyway we can replace a single wooden plank as it's damaged without lifting all the planks ? Thanks
If it's only damaged at one particular point,why renew the whole board.Much easier to renew a smaller piece.I use a Fein Supercut to cut out the damaged piece,then remove the bottom of the groove on the new one,glue then slip it in.If the flooring's on battens/joists make sure you cut on top of one either side,but you know this don't you. :roll: Some manufacturers also have repair kits might be worthwhile getting in touch with them. joe
