Isolator membrane over asbestos tiles in classroom

Discussion in 'Vinyl / Impervious floor coverings' started by Trimmer, Sep 6, 2012.

  1. Trimmer

    Trimmer Well-Known Member

    1,464
    490
    83
    Has anyone used an isolator membrane over the old 9x9 asbestos tiles in a classroom?

    I'm thinking of using the ardex one (about the best value one I can find) with Polyflor ecomax ontop.

    Not sure if the membrane will be sturdy enough.

    The other alternative is to take them all up and screed but I'd rather not.

    No doubt there'll be a few loose ones that will have to be patched.
     
  2. bournemouth

    bournemouth Super Moderator

    2,015
    766
    113
    Isolator as in the oe with nobbles on underside ? I've sen a class room done in it and looked very bad due to chair marks all over I personally wouldn't use it in a class room
     
  3. Trimmer

    Trimmer Well-Known Member

    1,464
    490
    83
    Thats a good point. Most of the chairs have little skinny metal legs and the others are casters.
     
  4. dazlight

    dazlight Super Moderator

    7,218
    1,711
    113
    Last classrooms we did had to have them all done with Ashpalt then screeded
     
  5. Matt

    Matt Well-Known Member Staff Member

    6,328
    1,402
    113
    tends to dent easy with point loading.
     
  6. hobbit

    hobbit Well-Known Member

    501
    223
    43
    over here 900 schools have been identified as having asbestos products (varying types) so it has become a bad word now.
    Now we all know that the tiles are minamal risk, but i would check with you local authority about handling this, advise seems to vary a lot but once the "A" word has been used the world panics. If in 2/3 or more years if the janator or a pupil coughs that must be the cause.

    The H.S.E website used to give advice about the removal of these but i havin't been able to find it recently, so i don't know if your still allowed to do this or weither you or the school have to bring in a specialist.

    I don't want to panic you but I would really check this out
     
  7. merit

    merit Well-Known Member

    8,222
    1,681
    113
    I personally wouldn't take on removal of anything with asbestos in, even if it is 0.1% especially in a school
     
  8. Matt

    Matt Well-Known Member Staff Member

    6,328
    1,402
    113
  9. pf flooring

    pf flooring Well-Known Member

    1,600
    602
    113
    can you not screed them in? spray with water scrape up the loose bits prime and coat in bag and bottle, when I done the asbestos course they said that was an option if removal isn't possible.
     
  10. Matt

    Matt Well-Known Member Staff Member

    6,328
    1,402
    113
    you can apply stuff over the top providing you dont disturb them.

    However, thermos tend to become loose if you screed over them. When the screed is drying it shrinks and can pull up the tiles underneath. You may not realise when you return to fit 24hrs later but a few months down the line they will break up.


    So really you dont wont to try and bond anything to them, best bet is to use a floating system over the top. But again floating systems have there draw backs also.
     
  11. doidgey

    doidgey Well-Known Member

    378
    28
    28
    I have used a Isolator over tiles before and fitted polysafe on top in a canteen no problem yet bin down 5 years now.

    Steve
     
  12. tarkett85

    tarkett85 Well-Known Member

    3,183
    484
    83
    Jumpax or similar system?
     

Share This Page