Anyone know where i can buy one of these or similar; http://shop.janser.com/product_info.php/info/p224800013_ULTRA-Nozzle-with-rounded-Nose.html Tried Janser UK website but i couldn't find one,any help would be appreciated. Thanks
I just bent the end on a normal speed weld nozzle ! Try Sweeney Todd your local wholesaler should be able to get them for you
Heat the bastard out of a normal nozzle and the push gently on floor rolling back and forward on the tip it takes bit of time and carefull nit to snap it but you can bend into correct angle for yourself which may not be the angle a new one is set at
That's more or less what I did but just gently tapped it into shape with a hammer ! A mate of mine did it with a blow touch just heated the tip until it glowed red then bend it & pored water on it like a Propa black smith !
Thanks Gents. I know if i try to heat it i'll snap it and i 've got to buy a normal one to try to form the bend.So i might as well get the right tool from new. I've got the curved long nozzle but can't get to grips with them.So i'll try mjfl before i try Sweeney.Thanks again for all the feedback
will get one on the shop for you but my computer is taking a ridiculous time to do anything at the mo
