I have ajob to do, 4.35x4m. Customer wants floor level and smooth. Right now its got holes, clearly not level. What would you advise for this job? Firstly to fill the holes/dips some which are about 3cm, then to level the floor. I need to the do the floor in one day and im no expert in screeding. Any advice appreciated.
Are you laying the flooring or just leveling it ? Fill the holes with Ardex rapid A45 if you use warm water it will dry solid in half an hour to an hour then prime & I'd recommend using a water base screed if your not used to screeding also spike roller will help a lot ! If it needs a DPM use laybond rapid DPM dries in a hour You'll get it done in a day no problem mate !
I was thinking ardex 45. Yes I will be laying sheet vinyl in there, it's a storage room for some flats and I'm following someone else's quote. I do have a roller. I've done some screeding but not very confident as I hardly do it.
Same as spacey for me mate , been using the ' level it ' gear lately tho and have to say its great goes off in no time
Looking at the work on here I'd agreebutive see loads of rubbish on jobs. Up the skirting, rubbish levels, bad mixes
