Anything you put on it will probably stand out just as much as the shine when the light hits it,better to just go for the replacement
Wd40 will dissolve the wax, if that's what's causing the shine, then a bit of soap should get rid of any residue of wd40, there will probably be...
I'm only talking about unclicking the row with the faulty board, takes about 10mins, both ways work, just a matter of preference
Have you tried wd40?
On a lot of laminate you can split the floor by knocking it into the expansion gap, replace the board, then knock it back together
That's providing he has left enough expansion gap
I'm accidentally using an ox trowel for feather, which i quite like, i say accidentally, because if i had known it was £50 before i took it to the...
Possibly take the carpet and underlay to the job, get your awls out and cut to fit, if you are lucky they might all be identical, so you might be...
Has he done a full plank plus a little piece on all the border? Definitely shouldn't be gaps against the walls
If the fitter had done the silicone, how would he have known it was short?
I quite often use their levelflex, not bad stuff
How much you asking?
I've done that kind of replacement a couple of times with no problems, i used an epoxy adhesive and glued the replacement board to the existing...
Who is the manufacturer?
Have you tried IDS,i know they stock a lot of the qs laminate, not sure about lyvin, but worth asking
And great for that odd occasion when you have a 4m wide room and the carpet's 1 or 2cm under
You could try cleaning it with karndean remove occasionally, then go over with clean water and hoover it up with a wet and dry vac to prevent...
About £4000
What product are you exhibiting?
I normally use lecol, never had any issues with it
