Industrial vacuum/dust extractor

Discussion in 'Tool Chat' started by Glenn H, May 24, 2018.

  1. Glenn H

    Glenn H Well-Known Member

    646
    142
    43
    What are you guys using. Thinking of buying a setup instead of hiring. ??
     
  2. coolevilangel

    coolevilangel Well-Known Member

    4,305
    912
    113
    We use Metabo asr35 m class auto clean, with a dust commander/filter attached.
    But we generally do mainly domestic areas upto 200m2 odd
    If I was doing anything more than that or more commercial I’d be looking at a lot heavier gear.
    Think neilydun has a commercial setup?
     
  3. Glenn H

    Glenn H Well-Known Member

    646
    142
    43
    I'll be needing the larger set up. Also need to shop around and find best price for the dust shroud. Their bloody pricey too
     
  4. Neilydun

    Neilydun Well-Known Member

    2,859
    1,212
    113
    Been using a Spe 316 vac for about 8 years, and can`t break it.
    Also use some Preptec 3 motor vacs. There both relly good, even with quite heavy grinding, and there a bit smaller so go in the van easier.
    I think anything bigger will require 3 phase, which is a pain.
     
  5. Glenn H

    Glenn H Well-Known Member

    646
    142
    43
    316 is ideal and what we hire currently, just on lookout now for something suitable that's not ££££s
     
  6. Neilydun

    Neilydun Well-Known Member

    2,859
    1,212
    113
    These are really good, and much easier to handle when loading. Nice and shiny in the picture
    [​IMG]
    What were you looking to spend ?
     
  7. Spacey

    Spacey Super Moderator Staff Member

    6,516
    1,878
    113
    Numatic Hetty :oops:
     
  8. Busylay

    Busylay Well-Known Member

    70
    14
    8
    e Metabo asr35 m class auto clean, with a dust commander/filter attached.
    Do you use bags in that ?
     
  9. coolevilangel

    coolevilangel Well-Known Member

    4,305
    912
    113
    Course mate
    Use the bags that are for it.
    The heavy black bin liner type ones
     
  10. Glenn H

    Glenn H Well-Known Member

    646
    142
    43
    About £700/800. Ill try and get one from the used surface prep hire firms soon enough.
     
  11. dazza

    dazza Well-Known Member

    698
    103
    43
    This is what I use. It's a numaric nv1000 cost about £100 off ebay at the time second hand.[​IMG]

    Sent from my SM-A320FL using Tapatalk
     
  12. mjfl

    mjfl Well-Known Member

    6,258
    1,593
    113

Share This Page