Jammed coil nailer

Discussion in 'Tool Chat' started by Robroy, Jun 13, 2019.

  1. Robroy

    Robroy Well-Known Member

    921
    74
    28
    Can any one tell me what I have to undo to get the piston back on the coil nailer as you can see i have a nail well jammed in, cant get it out
    rps20190613_183623_422.jpg
    It's a cn45
     
  2. Spacey

    Spacey Super Moderator Staff Member

    5,544
    1,702
    113
    You need an awl and a hammer
     
  3. Robroy

    Robroy Well-Known Member

    921
    74
    28
    Dont think that will work already tried with a small nail punch
     
  4. Floorever

    Floorever Active Member

    30
    6
    8
    It’s like where’s wally!
    I can’t see the nail :(
     
  5. Neilydun

    Neilydun Well-Known Member

    2,147
    1,069
    113
    You need a bigger hammer.
    I keep a broken driver in the box, which is perfect for smashing out a fouled pin.
     
  6. Robroy

    Robroy Well-Known Member

    921
    74
    28
    Okay so is there no way.of undoing the gun to release the piston rod.which is jammed down ?
     
  7. Neilydun

    Neilydun Well-Known Member

    2,147
    1,069
    113
    Don`t think so. Ive had them apart loads of times.
    It just needs smashing out, as its jammed in there
     
  8. Spacey

    Spacey Super Moderator Staff Member

    5,544
    1,702
    113
    Get the nail out and fire the gun and the firing pin will go back in
     
  9. mjfl

    mjfl Well-Known Member

    5,795
    1,531
    113
    As said by others, turn it upside down and hit it firmly until it comes out, you may damage it in the process or if you're lucky you wont
     
  10. Robroy

    Robroy Well-Known Member

    921
    74
    28
    I have been trying to knock it out the way it went in , would it be better going the other way cos this mother ain't moving
     
  11. merit

    merit Well-Known Member

    5,714
    1,297
    113
    Smack it back in towards the gun


    Sent from my iPhone using Tapatalk
     
  12. Rugmunching

    Rugmunching Well-Known Member

    1,606
    351
    83
    Throw it away and get a tacwise!
     
  13. mjfl

    mjfl Well-Known Member

    5,795
    1,531
    113
    You can send it to me and I'll only charge you for the parts if any needed
     
  14. Robroy

    Robroy Well-Known Member

    921
    74
    28
    Thanks mjfl i will give it another go first :)
     
  15. Spacey

    Spacey Super Moderator Staff Member

    5,544
    1,702
    113
    Have you seriously not un jammed it yet ?:eek:
     
  16. Robroy

    Robroy Well-Known Member

    921
    74
    28
    No I haven't I have been trying all day and night since last week :(
     
  17. Spacey

    Spacey Super Moderator Staff Member

    5,544
    1,702
    113
    Is the firing pin still stuck ?
     

Share This Page