I plan to glue solid oak parquet wood blocks down to a newly laid floor leveller. (sika floor level 30) Do I need to grind the floor leveller down before starting with a diamond floor grinder? I planned to use sika t54 glue, is there an alternative I should consider or is that a good flexible glue? Cheers
I'm not, I'm asking if I should. Sika state " Concrete and/or cement screeds must be ground and thoroughly cleaned with an industrial vacuum."
Always surface dpm for solid wood, dpm 1 c, R 3 E primer, blind with sand and vacuum off the excess then go at it. Sent from my iPhone using Tapatalk