Sanding with a ROS?

Discussion in 'Wood' started by kingcod, May 23, 2019.

  1. kingcod

    kingcod New Member

    1
    0
    1
    Just about to start a small job laying oak parquet in herringbone in a hallway - only 4 sq metres. I'm not keen on blowing my budget on hiring a floor sander. Also doubt I'd even be able to manoeuvre it. Anyone got away with using a decent Random Orbital Sander to finish something of this size? Iv'e a Metabo ROS which is a bit of a beast and has sanded 10 metre bar tops before ....
     
  2. merit

    merit Well-Known Member

    5,714
    1,297
    113
    Should be fine if it’s engineered well


    Sent from my iPhone using Tapatalk
     

Share This Page