got a job in the pipe.. old karn been down 12yrs.. around 50m2.. going to have another lvt after kitchen fitted, options to get the bugger up?
If ply then just cut small section and rip it up by the ply. If it's on screed then get yourself a stripper for the day or go by hand depending how much of a beast it is to pull up.......or get a skivvy to do it for you
Hire a floor stripper, will not only save you allot of hard work, but will take the flooring up considerably cleaner helping you when you do the floor prep for the Lvt. If it's on screed you might get lucky and they pull up by hand okay.
Depend how well it got put down, bully stripper job all the way down to pop it up similar to crunchys with a paint scraper, price for former
Where’s the job? National floor preparation centre in Cannock has all the machines for anything flooring related Wolff turbo would demolish 50m2 in about an hour
Did you do a site visit? I always try and pull a test sample up to give a better Insight, otherwise use a machine j7st incase it's a beast by hand
sorry for late replys.. yes its conk floor..just spoke to national floor, great advice, job is lichfield