Wall adhesive

Discussion in 'Vinyl / Impervious floor coverings' started by Neilydun, Dec 18, 2020.

  1. Neilydun

    Neilydun Well-Known Member

    2,859
    1,212
    113
    The job were on at the moment requires about 350 sq. m of Expona to go round the walls.
    The walls are boarded, taped & jointed and have been painted.
    I had one exactly the same earlier in the year, but much less sq m. I used F46 on the wall and tile, let it go, and it seemed to stick like shit.
    But, over about 8 weeks, quite a few peeled off, and we had several re-visits. For the most part, the paint stayed in place, but the tile peeled off,

    The ones that peeled, we used contact spray and they have remained in place, with no issues.
    Im not a great fan of contact spray, but its a lot of area to use F60 or similar.

    Whats worked for you ?
     
  2. Neilydun

    Neilydun Well-Known Member

    2,859
    1,212
    113
    Also, no heat on the job.
    Cold as you like !
     
  3. Spacey

    Spacey Super Moderator Staff Member

    6,516
    1,878
    113
    Contact spray
     
  4. Neilydun

    Neilydun Well-Known Member

    2,859
    1,212
    113
    Which do you use Mr. Uzin ?
     
  5. Spacey

    Spacey Super Moderator Staff Member

    6,516
    1,878
    113
    Just the one from headlam mate Works a treat
     
  6. merit

    merit Well-Known Member

    7,969
    1,639
    113
    Mapie do loads
    Adesilex vs45 is one but they have a few adhesives for lvt on the wall


    Sent from my iPhone using Tapatalk
     
  7. Distinctive Adam

    Distinctive Adam Well-Known Member

    1,689
    496
    83
    Use Uzin 2000s or Murexin d391
     
  8. Jason Sheehan

    Jason Sheehan Well-Known Member

    115
    15
    18
    Uzin 2428 for walls I find works
     

Share This Page