Stairrods premier lip Sent from my iPhone using Tapatalk
LVT would have been fine if the prep work was done correctly, you used a dry back (glue down) with HT adhesive and put blinds over the windows to...
Could be the underlay not being firm enough, the sub floor not being flat or solid enough or any number of things, your best option may be to...
If you get a lot of light either put up blinds and go with a glue down LVT using a proper flooring installer or go with fully vitrified porcelain...
6mm would have been my minimum ideally 9mm for stability, quickstep won’t warranty their products unless you use their materials so it really is...
To add about the denting what is causing the indents? Did you put any castor cups etc underneath to spread the load? All flooring is susceptible...
Click systems are shocking, you can’t have any direct sunlight on them or they will fail (which has happened here), your subfloor prep needs to be...
Fully vitrified porcelain is the way to go I wouldn’t be confident in anything else not having problems and I would use ditra matting below the...
Cemfloor therm will do the job well, the builder will need to get it to sr2 (5mm discrepancy over a 2m length) then the amtico fitter needs to get...
Stick to polyprop if you’ve had moth problems I would go the Victoria heartlands ultra route and £30m2 on a 80/20 won’t get you much worth buying,...
No direct from the spec sheet When wood flooring is to be adhered, first prime the cured ARDEX DPM 1 C with ARDEX R 3 E Epoxy Primer, blind the...
Sheet vinyl is the same prep as LVT Sent from my iPhone using Tapatalk
Ardex K301 Sent from my iPhone using Tapatalk
I’d put up the prices to make it viable no point in being a busy fool, strip out anything not worth putting down same on the carpet side of...
Remove everything, grind off bitumen off the top of my head slurry, k301, dpm1c then prime and CL or k40 where in Manchester are you Sent from...
Go with a click system if it’s t&g don’t bodge it needs ply and gluing down the underlays are crap and a t&g shouldn’t be floated that’s what the...
You need to mechanically remove it, grind it off or get a shotblaster on it the installers are right their screed would fail. Sent from my...
All carpets will flatten it’s a textile anyone who tells you different doesn’t know what they’re talking about, Westex ultima/major, brintons bell...
About £10 a bag difference Sent from my iPhone using Tapatalk
For 75mm you’re looking at around 150 days drying time, the screed will change with humidity levels in the air which is why you need to control...
