As spacey's says, if you go on it before the 30 days it's possible slab could crack and break the dpms integrity, and going in that early will...
RIP it up and start again as the song goes, chalk it up to experience, if you need a floor fitted get a floorer to do it, just as you would get a...
Amtico signature
That's a dogs dinner, your not fitting lvt over that in anyway shape or form, unless you DIY it, no professional will go near that
Spotnailer (mallet one with 22mm staples) is fine for chipboard if space staples correctly, floorboards you need nails/screws, proper nails mind
Be prepared to be earning circa 50 quid a day for a year or 2, you can afford to do that then I would of thought asking your partners uncle if he...
Use a good primer one of the grit ones and a fibre screed over the top would be my way of doing it, obviously checking that tiles are solid and...
Knighttile doesn't always sit 100% flat as it's cheap chinese crap, should feather the joints and the karndean ps is also crap its essentially a...
No rates in public mate, phone bosley up and have a chat, it's just reading going forward as Crawley warehouse is being shut as most of our new...
Someone has got an epoxy stuck floor by sound of it, floor tile stripper from hss and a fair amount of swearing
Remove them, then will probably need to use either fball 1200pro or Ardex NA due to glue residue
Shocking
Issues being if not spaced right will all lift up if stuck, check the spec, looks a poured screed
Go engineered real wood is a pain and most people cant tell difference
Sure that's a cement based new subfloor that been installed? Looks to light to be concrete from the photos, looks like a poured slab which could...
That's an option on laminate floors as the pva would bond onto the MDF not sure would work as well on pvc
Heat seam? If you want to keep cost down and dont mind it potentially wearing prematurely, should be fine though I'd of thought
If your house is 1850 and you want bamboo then you will need to have your subfloor ripped up rescreeded and a whole lot of prep for it to go down...
80mm you are talking circa 130 days drying time in ideal conditions, i would hazard a guess that you would be ok using a primer type dpm and then...
1100 only for my money if sticking to balls stuff
