Well it's not pva .
Renovation or na
Don't see the issue as long as you use the correct screed and prime. It's basically latexing over ply. Also I get a better finish with screening
Here he is names Scott. https://www.mybuilder.com/profile/view/scotty07 really good lads.done 160sqm lvt for me in a day between them and there...
I subbed a job out to a couple of lads up that way last year. I'll see if I can find there details for you.
Minimum is 6mm. I usually just screed on chipboard. Easier and cheaper dependant on the job spec and situation.
Just start a small section first and see what the client thinks. I came unstuck earlier this year with some moduleo select that a client purchased...
I've got the 18inch marshaltown brilliant for big areas and I find them better than the ragni which I used to use.
Cheers mate. Which size nails do you use on it? It's only 6 mm going down.
Hi all. Can you use a coil nailer on access flooring? And will it hold ok? Cheers
This is what I use. It's a numaric nv1000 cost about £100 off ebay at the time second hand.[IMG] Sent from my SM-A320FL using Tapatalk
Jps seems to be ok to me. Had problems with Scala and shading a lot.
that's an issue with the boards in my opinion. Probably due to moisture but from the wood not your subfloor. Tolerance of 3 MM is on fully stuck...
Yep .
If I think this is who I think it's a job I done taking advice off this forum at the time in 2013. Yes moisture was checked by myself and was...
Wow you seem to have the same problem as someone I know!
Not with wood flooring you don't. But looking at the picture it will burn out due to the wires being to close together.
Wood flooring can be installed straight over it with an underlay underneath. If lvt click going down you need to pour fibre screed over I normally...
It's 32 amp for more power Spins the dust off screed in seconds. I've got the str with 4 discs including pcd and dust cowl. Wouldn't be without it...
They used the underlay to get the height back on the skirting. Should have used thicker ply without the poor screed job. It needs to come up and...
