Are you sure it’s £35m2 cheaper just for the actual product or is this a fitted cost. Are you wanting standard Argento or herringbone
Have a look at tompkinsons tweed
Has a floorlayer fitted round that radiator pipe :(, lazy cut and filled with silicone. In terms of moisture, I’ve never used epoxy in a bathroom...
What plywood went down before the flooring was it either sp101 or fg1
Can you confirm a few things first…. What type if subfloor do you have wood/solid. Is there any form of underfloor heating. Was the opus brought...
Luvanto have a white sparkle, is moduleo too expensive as think that have one
They are more noticeable than they should be, personally I wouldn’t leave my work like that. Can I ask how much you paid for the installation as I...
Question 1… yes wool tends to be more difficult to remove stains from as it’s an absorbent fibre, some will have enhanced stain protection and...
Hi all does anyone know what carpet rights Ridley twist and ultimate emperor are in the real world Thanks guys
I use a lot of gerflor creation 55 it’s cracking for the cost. Luvanto sells well as well In terms of design and realism Van Gogh has the most...
Remove any laitence so you can see the aggregate and is dense and solid…. Then use an epoxy dpm to be safe. Builders say these are fast drying but...
Anyone on here got a festool rg130 grinder and if you do what they like or any alternatives
First thing is ideally should have been flooring grade ply (fg1 or sp101). Second thing is are your ceramics on timber or concrete, I’d be pulling...
I doubt it’s dry after 6 weeks at 50mm also not sure if you used the correct meter. Was it a reading for relative humidity or moisture as the...
How long has the slab been down have you got a RH reading….. Most levellers will do as long as it’s double primed but check the moisture readings...
Depends what you want it to look the squarest and straightest from Personally if your hall is the smaller narrower area I’d go straight in the...
fair enough but you did it yourself!!!! If it failed then you would have only yourself to blame. It’s held out for years that’s great for you, but...
Hire a diamond grinder and take off the high spots and then give it all another skim…… Or rip it up and get a professional in to sort it, you...
Prime the nmp and screed with a flex fibre screed should be ok
Why have they given 2 coats of feather..... Normally I skim the joints or if there is a ridge but if the floor was so bad 9mm ply would be better....
