Done that at home had no issues, not right way of doing it though
Not wanting to throw the floodwater under a bus but it's his problem to rectify, he should of called it before installing, not a great finish by...
Do a course and try and be a boy for someone for at least a year depending on how in depth you want to go will depend on how long it takes, I'd...
24mm ply in 8x4 sheets would do the job I'd imagine, I'd also not recommend loose lay products, fully stuck on ht or a fibre glue myself.
Not good at all but going against the grain, if it's just the edges your not happy with and your happy to have a silicone perimeter finish, say to...
As long as floor is within tolerance you could use a clic system, looks good when skirts are off and put back on after, personally I'd go for a...
Bet your missus is a happy girl then
And set out is about an inch out in hallway from front door, should be more central with front door so the drop backs have an equal cut, the...
Wouldn't of looked as bad with a contrasting feature strip and mitred corners imo, although I agree pleated Herringbone looks best fitted to...
5mm gap unless a Saxony one then allow a couple mm more, always use a lion knife to tuck and a bolster to set on the gripper
Night before paper felt everything up with a ladder
Ht, autocorrect error
I'd go route neilydun said personally, way I'd look at it is the slabs are probably direct to earth and could cause a failure, it's not what you...
White oak use proper HT addy and your fine, any little spill through will sort out the hairline, horrible colour though amtico should stop selling it
Well fitted not my cup of tea though
Double bank the gripper on the length of the room if no power stretcher, will get it nice and taut that way
2 coats of mapei 1kturbo and a smoothing compound over the top should do the trick id of thought
"diy enthusiast" id say taken to long (4 hours?) to do a small area, in between fags/hot moments and its not bonded properly, cracks usually...
cracks in a 1.4m2 screed! either you have mis inputted the number or something is probably wrong, thats the size of a toilet/porch, no way should...
