The bitumen, then get the concrete flat at source dpm and screed Sent from my iPhone using Tapatalk
Honestly remove everything and start from scratch, if it’s generally quite uneven it’s always going to be a nightmare to level properly then go...
Always prime, you will start to get a debonding between the concrete and screed it might happen immediately or in a year no way to know, also a...
No I just find PU’s too soft (Tredaire chromium being an exception) so the carpet doesn’t last quite as long (won’t matter in a bedroom) Sent...
Go with Axfelt or a crumb rubber don’t put a Wilton or Axminster on PU, ply the gripper to height, double bank on the width and use a power...
I’m not floating any t&g it’s getting stuck to that subfloor Sent from my iPhone using Tapatalk
Fball B95, Pallman P6 Sent from my iPhone using Tapatalk
Mass lots of mass, you also want to use different insulations of varying thickness with air gaps between plus you will need to isolate the floor...
Always a better finish if you undercut, wood/laminate there isn’t another option unless you want it to look crap, LVT can be cut around the...
What subfloor are you looking to put the flooring onto? Sent from my iPhone using Tapatalk
Sticking with the same throughout can be more economical depending on sizes, go to a respectable independent and have them supply and install it...
New build will need a surface dpm and screed, the new concrete is never dry enough to fit on without the prep, personally not a fan of cloud 9...
It’s a natural wood product I fail to see a problem with the colouration, if it’s glued down it’ll be a pig to get up and I would leave it as is,...
New build will need a surface dpm unless already been done and screeding, prices sound too low to be fair. Sent from my iPhone using Tapatalk
Can’t be used like that according to Ardex the compression strength is too high you’ll have to grind it off. Sent from my iPhone using Tapatalk
It slows down the release of moisture drastically so you don’t have issues with your flooring, carpet and laminate should still be installed on...
You need a surface dpm a vapour barrier won’t be enough Sent from my iPhone using Tapatalk
Needed screeding and a surface dpm doing it’s always going to have too much moisture in the concrete for wood Sent from my iPhone using Tapatalk
1mm a day up to 50mm anything over that double the drying time, grind it back RE3 primer, blind it, NA, Dpm1c, NA and hope for the best Sent...
For all that’s holy don’t touch it again you’re just costing yourself more money to fix your bodges, all needs ripping up grinding down dpm and...
