Ardex FA20 and Balls 700. Both brill! Tried the K40HB and don’t like the finish, it’s too dense. Struggle like f**k rubbing/sanding it down,...
Assholes. Absolute scum of the earth!!!!!
I agree about the ardex feather but I’m not fussed about the repair mortars. I find they’re all much of a likeness. If needs be, I mix it with hot...
I’ve used green gripfill for years. Providing you prime the floor, it’s not going anywhere! Flexy fix is great too. So is the f ball stuff
Poor fitting! Should be neater than that. Get the affected planks replaced by the installer.
Not a big job to re-stick the suspect planks but they shouldn’t be like that. Water will just get in there and worsen it over time. Needs sorting
I’ve just installed the SM-KP99 this week and for once, it was cut perfect. Went down a treat!
It’s a solid bond, that’s for sure!!!
Level isn’t even in the standards. It’s difficult enough trying to get these shocking floors to sr1, never mind level! I prefer the term...
Easier said than done but it certainly sounds like you need to slow down daz. It has been a crazy year and it will continue to be so but you can’t...
Can’t complain for the money. Fitted plenty of it over the last 5-10 years
F49 or ke66 depending on job and design
Yes they should be re-bevelled. Lazy fitting!
Sorry, should’ve read “scribed them in”. It’s the correct way to back mark/scribe them into obstructions to ensure a tight fit that follows the...
Are there any gaps at the skirting boards? Looks like they’ve just butted the planks off the skirtings and not scriber them in.
Seeing as it’s a click, you don’t need that spec of ply. Just use wbp ply from timber yards. Fixed at 150mm centres with 25mm screws if it’s 9mm...
As suspected! They should’ve been on the job for at least a day! Their fault 100!
Defo not acclimatised! What adhesive was used? Is there any direct sunlight? High temps etc
Well done mate
You need 30.96g of part A and 14.4g of part B as the area equates to 0.36sqm. can I ask why you are doing this though? If you have the quantities...
