Solid wood on asphalt? Why asphalt and not a dpm?
just found this on ebay. £22.94 inc postage....
Found this on ebay. It's a bit short on power though (370w) and paddle speed is only 55rpm....
You can "v" the corner so you get 2 welds at 45degrees either side of the corner. Do a search on youtube. There's bound to be something there
Looks like anhydrite
Going to have a go at making one of these. Seem to be going through bags like they're going out of fashion. http://www.internode.co.uk/cyclone/
Had 14 lengths of 4.2m skirting to get up to the flat I was working in. Parked on P2 so had P2, P1, Ground floor, Upper ground floor, 1, 2, .......
[ATTACH] [ATTACH]
That looks like some of the early fast set gripper adhesive. It expands as it sets and if to much is put down it grows like in the pic. Learnt...
[ATTACH] Didn't even have enough spare to do hatch properly.
Kersaint 20mm oak smoked. Had to use all boards as no spare. Really tight. Customer was aware and didn't want to get an extra pack but also said...
Hows this one. Smoked range again.[ATTACH][ATTACH]
Another screed question. Anyone use F5000 and if so what do you think of it? What sort of cost is it?
Is it for wood only or conc as well
I normally lay carpet over size on landing and pin in place, mark edges, remove pins, cut to marks then get whipped. Sometimes I'll gripper 1" to...
Anyone got a data sheet on this screed?*It's a CFS exclusive so can't get info from tremco site.
Pass. Can you do a dummy run on some scrap?
I'm still on a s2 but looking for a longer lasting battery phone. I might get a nokia asha 300. Basic but hopefully the thing won't need charging...
Had a call today from a customer that wants Karndean in his RV. Going to have a look tomorrow. Could be interesting if it's got the slide out sides!
Mapei topcem?
