The annoying thing is, I've got a fitter on holiday in Portugal at the moment, another member of staff on holiday somewhere ( never thought to ask...
A couple of years ago, i spent a week working in an empty cottage in the middle of a forest in Wales, no phone signal, no people, even though i...
I was supposed to be off this week, was originally going on a course, but the engine went on my van, so I cancelled it, but kept the week as a...
I've got 2 lasers, but still mainly use straight edges, more out of habit than preference
Heat pak is just jumpax without the insulation on the bottom, i'd just replace it with the same, as it's specified for ufh, definitely wouldn't...
You could try lifting the edges and brush on a small amount of latex( I'm not sure if you can still buy little bottles of copydex) or even pva
I suppose it's lucky that he could tell,which particular planks would expand, the problem is, even if you don't pay him, you still have a ruined...
You could try chiseling out a few spots of the screed to get a pry bar underneath and prise them upwards, i usually prise them upwards anyway,...
You are probably looking at somewhere between £4000 -£5000 depending on manufacturer/style of floor you want, wood can go a lot more than that,...
Are they timber or mdf skirts?
At this rate, we might have to start nailing it down :D
I did a laminate one, about it year ago, multiple rooms and hallway, finished the job and immediately binned the stand.Started a kellars allora...
Does anyone do much of the laminate or rigid core herringbone, the ones designed to be fitted across the room and only in one direction? How do...
I would normally go to Havwoods accessories in Preston for something like that, they are usually quite helpful, they may be able to get one and...
Looks like the 6inch knight tile, was it fitted on a very hot day? How long after fitting, did you notice the gaps?
How long has it been down?
I'm assuming they fit the skirting after laying the floor, i prefer to fit skirting first, the fitting takes a bit longer, but you're not left...
I always find it easier to grind down bolts and washers afterwards, rather than pick them up first, the time consuming bit is getting a good coat...
So he has the equipment to grind the screed and residue down, but chose to do it after screeding, then apply another coat, seems an odd way round...
The uzin comes with a nozzle that goes into the drilled hole,i think b&q do the repair kits,you get either 4or6 blocks and a little soldering iron...
