When you start looking at the budget underlay, the quality varies massively, you'll order a couple of rolls to try, but some of it is so bad, you...
Do you find that a lot of people aren't exactly in a rush to pay the balance, once the job is done and you have to start phoning them up to...
You could try bona freshen up, it's a removable coating, so if you didn't like it, you could easily remove it
Why are we so different to other businesses?if you bought your flooring from b&q ,you wouldn't get out the door with it without paying, if you...
Was just wandering how many of you require payment for materials before fitting
I would have thought the factory finish was the protection
It's hard to tell, but it looks like the oil has been applied with a roller, is it an oil or hardwax oil?either way, there doesn't look like...
Just put the haro stands in today, so going to bin the balterio
Yes, a very flimsy one, lifts off again far too easy then quite often won't go back properly, plus getting planks with dark lines down the edge...
A scabbler would do it, but possibly a bit overkill for the amount you want to remove and maybe a bit messy, personally, i would use a buffer with...
Has anyone else been having problems with balterio lately? My fitters hate it, the new joints are too weak and getting too many faulty boards
Probably a bit late now, but a band saw would do the job
It does take a little more effort to cut, but as long as your shears are fairly sharp it's nothing that causes a problem, the only downside to...
As for doing the course giving you the right, when i did the basic course, we all got a van sticker (along with a load of other freebies, but they...
If you do work for any shops that sell karndean, it might be worth just asking them to order them from karndean, you could try phoning karndean,...
I've never had a problem with 11mm underlay on gripper, it holds ok and on the majority of carpets the height difference is barely visible,...
Using the powerwalk at the moment, not the nicest stuff to fit, but same density as cloud 9 for about 40% less cost
Have you tried the QA underlay?
It's worth a try, double check the expansion gaps, i mean every inch, especially doorways where people tend to fit tighter to look better, it only...
Possibly the fitters brought in their own heaters while they did the job, took them away with them when they'd finished, leaving the room to cool...
