I would have thought dpm sheet, 50mm sand/cement/fibre would be better. A38 would be ready to lay on next day
Tbh, its pretty much the norm on new build, where were based. Normally the screeding contractor should return, and grind, but they never do. Best...
I use it, as its spec`ed by a builder I work for. Its by Polyflor, and has been ok, but i`ve only used in small areas Its not expensive
Just to add, Paul has helped me on a few jobs, and has been a reliable, hard working, and installs to a high standard.
I find plastic miles better than metal collated. With the metal I always find that it leaves sharp edges by the head of the nail. No jamming...
Most suppliers that I use stock plastic collated 19mm. C&F & STS defiantly do. For other sizes you buy direct from Spotnails with next day delivery.
Who is the developer ?
Easy enough, with no pattern to match. I would system 10 it
The problem generally, in commercial environments is there may be a bank of 7/8 showers in male and 6/7 in the female. There will always be a leak...
Do you mitre your capping, or wrap it ?
Try the Tradediscount shop, and you will see the type I mean. I used 44 for years and found it good adhesive. As Merit, we use Uzin 2428 most of...
It went mushy when we used it. Tried it a few times, but always failed.
I find rollers a waste of time. Cork boards are better. You could try double drop, or just let the 44 go taki, and see how you find it.
You could use anything to hold it in place, so long as it doesn`t damage the carpet
I never used to fit this way, in anything but pubs/clubs. Domestic always just used to use knee kicker. Don`t fit carpet anymore really
No, nails. When I started it was tacks, but then we used inch wire nails
[IMG] [IMG] WTF !
I have and don`t rate it at all. Maybe for domestic, but commercial showers 24/7 no good.
We used to do this years ago, when we were fitting pubs out. Turned an offcut of axi over, stretched out, then stop tacked through the offcut....
Should be fine, is it just air bubbles ? Have you been back the next day, to see if they have pulled down ? If your going into adhesive wet, you...
