Repair

Discussion in 'Subfloor Preparation' started by Neilydun, Oct 15, 2020 at 8:01 PM.

  1. Neilydun

    Neilydun Well-Known Member

    2,410
    1,119
    113
    Ive been asked to carry out a repair/infill.
    An internal blockwork wall has been removed and left a trench which is 45m long x 200mm wide x 100mm deep
    There is a physical membrane below, so nothing to worry about there.
    So, what would you use ?
     
  2. Spacey

    Spacey Super Moderator Staff Member

    6,249
    1,814
    113
    Feather finish :D
     
  3. Rugmunching

    Rugmunching Well-Known Member

    2,375
    425
    83
  4. Paul webb

    Paul webb Well-Known Member

    520
    58
    28
    Maybe concrete blocks to fill in the bulk of it first, are you screeding after?
     
  5. Neilydun

    Neilydun Well-Known Member

    2,410
    1,119
    113
    Come on, I would expect no less than 888 from you !
     
  6. Neilydun

    Neilydun Well-Known Member

    2,410
    1,119
    113
    Do they do it pumpable now ?
     
  7. Neilydun

    Neilydun Well-Known Member

    2,410
    1,119
    113
    Its a mixture.
    Some loose lay click, some c&c vinyl.
     
  8. Neilydun

    Neilydun Well-Known Member

    2,410
    1,119
    113
    I was thinking 3 options.
    Ardurapid or similar
    A35 sand & cement
    Standard sand & cement
     
  9. Spacey

    Spacey Super Moderator Staff Member

    6,249
    1,814
    113
    888s :rolleyes:
     

Share This Page