Sand and finish

Discussion in 'Wood' started by merit, Jul 17, 2020.

  1. merit

    merit Well-Known Member

    8,003
    1,640
    113
    Just looked at a engineered wood floor with a very weak natural oil finish. Been down a year and looks awful. Every drip of water stains it. I just put some maintenance oil on a test area and it stripped the colour off!! Anyone seen this happen Before? I think I’m looking at a full sand back, re stain with Rubio or bona create and lacquer. Any other suggestions that might work?


    Sent from my iPhone using Tapatalk
     
    merit, Jul 17, 2020
    #1
  2. Paul webb

    Paul webb Well-Known Member

    1,129
    141
    63
    Have you tried woca maintenance paste
     
    Paul webb, Jul 18, 2020
    #2
  3. Paul webb

    Paul webb Well-Known Member

    1,129
    141
    63
    Or maybe a hardwax oil
     
    Paul webb, Jul 18, 2020
    #3
  4. merit

    merit Well-Known Member

    8,003
    1,640
    113
    Tried a hard wax oil and it did the same. Stripped the colour out of the finish on a sample board!


    Sent from my iPhone using Tapatalk
     
    merit, Jul 18, 2020
    #4
  5. Paul webb

    Paul webb Well-Known Member

    1,129
    141
    63
    Maybe a barrier seal followed by lacquer
     
    Paul webb, Jul 18, 2020
    #5

Share This Page